zBOOST-ONE YX400-U for 3G Data

The zBoost-ONE™ cell phone signal booster extends a Cell Zone™ for 1 - 4 phones/devices on the same mobile network. The zBoost-ONE supports voice and data protocols at 2100MHz in homes or offices, increasing indoor signal coverage up to 1200 sq ft or 1-2 rooms. The zBoost-ONE is the first one piece cell phone signal booster, and actually syncs to your carrier to reduce dropped calls and increase call clarity. It does not require any external antennas or coaxial cable - just plug-in-and-play.

This kit works with:

• 3G Data for ALL European carriers (including Vodafone, O2, Orange, T-mobile, Movistar, SFR etc)
• 3G Voice and Data for the European network 3.
  

The YX-520i is a dual band cellular repeater that is compatible with European  mobile  networks except 3. This unit will improve voice services for any European network over an area of up to 300 square meters. It does not cover 3G networks, which require a 3G repeater. The zBoost YX520i is easy to install and use, and comes with everything you need to improve cell phone reception in your home or office.

Benefits Include

• Increases indoor signal coverage - up to 1200 sq. ft. or 1 - 2 rooms
• No external antennas or cable - just one piece!
• Easy to set up - just put it where you get signal and plug it in
• Supports 1 to 4 users operating on the same mobile network
• Compatible with phones, smart-phones and data cards using UMTS/2100MHz
• Extends phone battery life (uses less power when signal is stronger)
• Protects the carrier network using patent-pending technologies

Product Installation

Setup overview:

The zBoost-ONE™ cell phone signal booster extends a Cell Zone™ for 1 - 4 phones/devices on the same UMTS carrier network in homes or offices. zBoost-ONE will boost signal up to 1200 sq ft or up to 40 ft from the zBoost unit.

STEP ONE: Sync zBoost-ONE to your carrier network NOTE: This step only needs to be performed once at the beginning of your set-up Place the zBoost-ONE unit on a window sill or location of strongest signal. Connect the zBoost unit to the provided power supply and plug into a power outlet. The SyncLink Button will flash red. Make a call with your device. If using a wireless data card, make a connection using the software on your computer. Press the SyncLink Button. The SyncLink Button will blink green and the Handset Indicator will turn on. NOTE: If this does not happen, then the sync has failed. Disconnect the power from the wall outlet and repeat steps.

STEP TWO: The Signal Strength Indicator reflects the signal level being received by the unit at the window. Adjust the angle or position of the zBoost-ONE unit until the strongest possible signal is received. 3 or more lit bars will provide optimal performance (up to 40 ft from the zBoost unit).

Product Literature

zBoost-ONE YX400-U Product Specifications
zBoost-ONE YX400-U Setup Overview
zBoost-ONE YX400-U Product Brochure

Kit Contents